Anchor Windlass Store

  HOME > Other Products > Entertainment > Videos - Instructional >

Bennett DVD - Marine Fuel Tank Renovation Volume 1 - Removing Old Tanks & Building New Ones
Bennett DVD - Marine Fuel Tank Renovation Volume 1 - Removing Old Tanks & Building New Ones


 
List Price: $34.95
Sale Price: $30.58
You Save: $4.37


Product Code: 52367
Qty:

Description
 
Boating Fuel Tank Renovation Vol. 1 - Removing Old Tanks & Building New Ones
81 Minutes

Presented by master marine engineer Peter Wonson. The Complete Guide to Removing, Planning & Building new Fuel Tankage. Boat tanks don't last forever but are the hardest component to remove from your boat. Learn how to safely remove your old fuel tanks and do the planning to replace them with modern, durable and highly efficient new tanks. Using an easy to follow approach, clear demonstrations and close up instruction, you'll watch a complete removal of old fuel tanks from stripping them down, cutting them out of the hull, getting them out of the boat and planning new tankage.

Filmed in real time with clear demonstrations, this program follows each stage of the process in a step-by-step format teaching the novice and experienced alike to achieve professional results.Watch over the shoulder of marine professional Peter Wonson and learn the internal and external components of your fuel tanks while saving a sizeable chunk of your boating budget on repairs you can do yourself.

This is part one of the video series "FUEL TANK RENOVATION". Get part two (H9008DVD) to learn how to install your new tanks and complete the job for many years of trouble free boating.

Step-by-step instructions take you through the following procedures:
  • PREPARING WORKING AREA, STRIPPING THE FUEL TANKS:
    Safety Procedures
    Removing insulation
    Cutting away old pipes and hoses
    Revealing corrosion
  • PULLING OUT THE TANKS:
    Removing supports
    Breaking loose the tanks
    Lifting out of hole
  • CUTTING UP THE TANKS:
    Cutting exploration panel
    Removing bilge sludge
    Using the 'Nibbler'
    Using the power saw
    Lifting tank out of the hull
  • PLANNING THE ENGINE ROOM, INTRODUCTION TO TEK TANKS:
    Guide to a tank supplier
  • BUILDING YOUR NEW TANKS:
    Step-by-step demonstration to building your new tanks

Share your knowledge of this product. Be the first to write a review »